Specification of the purpose of the measurement.
Type
String (AN)
Length
Max 3 / Min 1
Codes
<> AAA
Line item measurement
Line item measurement specified by the Food and Drug Administration.
<> AAC
Retail container size
Size of a retail container in terms of volume.
<> AAD
Other US Government agency application
Description to be provided.
<> AAE
Measurement
[6314] Value of the measured unit.
<> AAF
Customs line item measurement
The measurement of a consignment or part for customs purpose.
<> AAG
Percentage of alcohol (by volume)
The measurement of the percentage of alcohol by volume.
<> AAH
Dimensions total weight
Description to be provided.
<> AAI
Item weight
Weight at line item level.
<> AAJ
Visa quantity
Measurement reportable for visaed merchandise.
<> AAK
Licence (quantity deducted)
Quantity to be written off from the total license amount.
<> AAL
Cargo loaded
Total tonnage of cargo loaded onto the conveyance.
<> AAM
Cargo discharged
Total tonnage of cargo unloaded from the conveyance.
<> AAN
Weight of conveyance
Tonnage of conveyance.
<> AAO
Conveyance summer dead weight
Registered summer dead weight total tonnage of the vessel.
<> AAP
Containerized cargo on vessel's weight
Total weight of containerized cargo on vessel.
<> AAQ
Non-containerized cargo on vessel's weight
Total weight of non-containerized cargo on vessel.
<> AAR
1st specified tariff quantity
Primary reportable quantity associated with a tariff number.
<> AAS
2nd specified tariff quantity
Secondary reportable quantity associated with a tariff number.
<> AAT
3rd specified tariff quantity
Third reportable quantity associated with a tariff number.
<> AAU
Package
Commodity/product shipped or sold in discrete individual containers which may be accumulated in a larger package.
<> AAV
Person
Physical measurement of a person.
<> AAW
Accuracy
Accuracy of the measurements being sent.
<> AAX
Consignment measurement
Measurement related to a consignment; to be specified by the measurement code dimension value.
<> AAY
Package measurement
Measurements of package.
<> AAZ
Handling unit measurement
Measurements of handling unit.
<> ABA
Unit of measure used for ordered quantities
The unit of measure in which ordered quantities are expressed.
<> ABB
Colour
The colour of an object.
<> ABC
Size
Dimensions or magnitude of an object.
<> ABD
Length
The greater of the two or three dimensions of an object.
<> ABE
Height
The distance from the bottom to the top.
<> ABF
Width
The distance from side to side.
<> ABG
Diameter
The length of a line segment passing through the center of a circle, sphere, etc. from one side to the other.
<> ABH
Depth
The distance from the top downward.
<> ABI
Ventilation
The number of air exchanges per hour.
<> ABJ
Original unit of issue
A code identifying the original unit of issue.
<> ABK
External dimension
The outer measurement of the referenced item or package.
<> ABL
Internal dimension
The inner measurement of the referenced item or package.
<> ABM
Test piece dimensions
The size of the test piece that was tested.
<> ABN
Average reading
Average reading of the test being reported on.
<> ABO
Comparison price measurement
A measurement used for comparison pricing purposes.
<> ABP
Unit of measure per unit of issue
Provides the unit of measurement which is to be used for a given unit of issue.
<> ABQ
Air flow
The movement of air.
<> ABR
Certified weight
Weight which has been certified.
<> ABS
Velocity
Speed.
<> ABT
Supplementary unit
Supplementary unit referring to the measurement reported.
<> ABU
Quota
Maximum number or amount.
<> ABV
Unit of time
The specification of a specific unit of time.
<> ABW
Unit of measure used for invoiced quantities
Unit of measure of invoiced quantity.
<> ABX
Usable or consumable content
Measurement of usable or consumable contents.
<> ABY
Payment cycle
Measurement of the period of time over which payment occurs.
<> ABZ
Plot size
The relative bigness of a plot or an allotment of land.
<> ACA
Space occupied
Space taken up or filled.
<> ACB
Building size
The relative bigness of a permanent fixed structure forming an enclosure.
<> ACC
Office size
The relative bigness of a room or building used for clerical or similar work.
<> ACD
Area damaged
The size of an area that was damaged.
<> ACE
Land size
The relative bigness of an expanse of ground.
<> ACF
Industrial plant size
The relative bigness of a factory or facility used in an industrial process.
<> ACG
Installed capacity
The maximum amount that can be contained or produced.
<> ACH
Warehouse size
The relative bigness of a structure in which things are temporarily stored.
<> ASW
Weight ascertained
[4240] Endorsement of the true weight (mass) as ascertained or verified by the railway (CIM 81).
<> CH
Chemistry
The given measurement value identifies the amount or percentage of a specific chemical within a substance.
<> CHW
Chargeable weight
The weight on which charges are based.
<> CN
Core notch dimensions
<> CS
Core size
<> CT
Counts
<> DEN
Density
Code to indicate the mass of a commodity per unit of volume.
<> DT
Dimensional tolerance
Possible range of values for a specified measurement dimension of a product, material or package.
<> DV
Discrete measurement value
The measurement specified is separate and distinct from other measurements.
<> DX
Dimension used in price extension
Description to be provided.
<> EN
Environmental conditions
The data values to be reported reflect the environmental conditions surrounding a situation including but not limited to test environments.
<> FO
Footage
Description to be provided.
<> IV
Interpolated value
Description to be provided.
<> LAO
Vessel overall length
Total overall length of the vessel.
<> LC
Limited weight/size coils
Description to be provided.
<> LGL
Length limitations
Indicates that value/range information is understood as length limitation.
<> LL
Lift limitation
A measurement indicating lift capacity limitations.
<> LMT
Loading meters
The length in a vehicle, whereby the complete width and height over that length is needed for the goods.
<> PAL
Payload
The revenue-producing load carried by a means of transport.
<> PC
Parting cut (sawcut)
Description to be provided.
<> PD
Physical dimensions (product ordered)
Specified measurement dimensions refer to physical dimensions of a product, material or package.
<> PL
Package limitations
A measurement indicating limitations associated with the package.
<> PLL
Platform limitation
A measurement indicating limitations in relation to a platform.
<> RL
Receiving facility limitations
Specified measurement dimensions are provided as a result of limitations or restrictions related to the physical dimensions of a product, material or package at the reception point.
<> SE
Property specification
Indicates that the data to follow are target specifications.
<> SH
Shipping tolerance
Tolerances related to shipping.
<> SM
Shade
Description to be provided.
<> SO
Storage limitation
A measurement indicating limitation in relation to storage.
<> SPG
Specific gravity
<> SR
Surface roughness
<> ST
Surface treatment
<> SU
Surface
<> SV
Specification value
A measurable item characteristic specified by the buyer, seller or third party.
<> TE
Temperature
<> TL
Transportation equipment limitations
A measurement indicating limitations in relation to transportation equipment.
<> TR
Test result
Indicates that the data to follow is the test result measurements.
<> VOL
Volume
Size or measure of anything in three dimensions.
<> WT
Weights
<> WX
Weight used in price extension
Description to be provided.
